Introduction
Product Identification
Safety
Operating
Replacement Parts
Service Intervals
Service Lubrication
Service Engine
Service Transmission
Service Electrical
Service Miscellaneous
Troubleshooting
Storage
Assembly
Specifications
Front Tire Inflation Pressures (Unloaded)
Front Tire Inflation Pressures (Loaded)
Rear Tire Inflation Pressures (Unloaded)
Rear Tire Inflation Pressures (Loaded)
Warranty
John Deere Quality Statement
Service Record
Specifications
Engine
PTO Horsepower 11.9 kW (16 hp)
Oil Filter Standard Single Element
Air Cleaner Dry Type w/ Safety Element
Electrical System
Battery Size 433 Cold Cranking Amps @ -18°C (0°F)
Fuel System
Fuel Filter Replaceable Element
Fuel Pump In-line with Electric Shutoff
Fuel Delivery Indirect Injection-Self Bleeding
Drivetrain
Transmission (Hydrostatic Model) Hydrostatic 2-Range
Transmission (Gear Model) 8x4 Sliding Gear/Collar Shift
Number of Speeds (Hydrostatic Model) Infinite Forward, Infinite Reverse
Number of Speeds (Gear Model) 8 Forward, 4 Reverse
Mechanical Front Wheel Drive (MFWD) Standard
Drawbar Tongue Weight Capacity 259 kg (570 lb)
Front Axle Operating Capacity 450-500 kg (992-1102 lb)
Rear Axle Operating Capacity 900-1000 kg (1984-2205 lb)
3-Point Hitch
Lift Capacity-61 cm (24 in.) behind link arms 422 kg (930 lb)
PTO
NOTE: The model 4100 Narrow tractor is not equipped with a mid PTO. A mid-PTO or loader should never be installed on a Narrow model tractor.
Clutch Type (Hydrostatic Model) Hydraulic Multi-Disk
Clutch Type (Gear Model) Single Stage Dry
Brake Type (Hydrostatic Model) Hydraulically Engaged Mid and Rear PTO Brake
Brake Type (Gear Model) Mid PTO Brake and ORC Clutch on Rear PTO
Speed-Mid PTO rpm @ 2650 engine RPM (Hydrostatic Model) 2117 rpm
Speed-Rear PTO rpm @ 2650 engine RPM (Hydrostatic Model) 545 rpm
Speed-Mid PTO rpm @ 2650 engine RPM (Gear Model) 2139 rpm
Speed-Rear PTO rpm @ 2650 engine RPM (Gear Model) 551 rpm
Fluid Capacities
Crankcase with Filter 2.2 L (2.3 qt)
Transmission and Hydraulic System (Hydrostatic) 12.5 L (3.3 gal)
Transmission and Hydraulic System (Gear) 10.5 L (2.5 gal)
Ground Speeds
NOTE: All ground speed calculations shown are with tractor operated at maximum 2860 engine rpm.
Model 4100 Gear Transmission with Standard 9.5-16 R1 Rear Tires
Range Low - Gear 1 1.1 km/h (0.7 mph)
Range High - Gear 1 1.7 km/h (1.1 mph)
Range Low - Gear 2 2.4 km/h (1.5 mph)
Range High - Gear 2 3.7 km/h (2.3 mph)
Range Low - Gear 3 4.9 km/h (3.1 mph)
Range High - Gear 3 7.8 km/h (4.8 mph)
Range Low - Gear 4 11.1 km/h (6.9 mph)
Range High - Gear 4 17.6 km/h (11.0 mph)
Reverse - Gear 1 0.9 km/h (0.6 mph)
Reverse - Gear 2 1.9 km/h (1.2 mph)
Reverse - Gear 3 4.1 km/h (2.5 mph)
Reverse - Gear 4 9.2 km/h (5.7 mph)
Model 4100 Narrow Gear Transmission with Standard 8-16 R1 Rear Tires
Range Low - Gear 1 1.1 km/h (0.7 mph)
Range High - Gear 1 1.7 km/h (1.1 mph)
Range Low - Gear 2 2.3 km/h (1.4 mph)
Range High - Gear 2 3.5 km/h (2.2 mph)
Range Low - Gear 3 4.7 km/h (2.9 mph)
Range High - Gear 3 7.4 km/h (4.6 mph)
Range Low - Gear 4 10.8 km/h (6.7 mph)
Range High - Gear 4 16.9 km/h (10.5 mph)
Reverse - Gear 1 0.9 km/h (0.6 mph)
Reverse - Gear 2 1.8 km/h (1.1 mph)
Reverse - Gear 3 3.9 km/h (2.4 mph)
Reverse - Gear 4 8.9 km/h (5.5 mph)
Model 4100 Hydrostatic Transmission
Forward-Range High 0-17.1 km/h (0-10.6 mph)
Forward-Range Low 0-9.3 km/h (0-5.8 mph)
Reverse-Range Low and High 0-8.5 km/h (0-5.3 mph)
Front Wheels and Tires
Model 4100
Model 4100 Narrow
Rear Wheels and Tires
Model 4100
Model 4100 Narrow
Dimensions
Model 4100 with Standard 9.5-16 R1 Rear Tires and 5.00-12 R1 Front Tires
Overall Length with 3-point Hitch 2616 mm (103.0 in)
Overall Width (Minimum) 1093 mm (43.0 in)
Overall Width (Maximum) 1211 mm (47.6 in)
Inside Width (Minimum) 607 mm (23.9 in)
Inside Width (Maximum) 725 mm (28.5 in)
Height From Ground with Standard 9.5-16 R1 Rear Tires and 5.00-12 R1 Front Tires
To Top of Hood 1108 mm (43.6 in)
To Top of ROPS 2003 mm (78.9 in)
Ground Clearance, Front Axle 323 mm (12.7 in)
Model 4100 Narrow with Standard 8.00-16 R1 Rear Tires and 5.00-12 R1 Front Tires
Overall Length with 3-point Hitch 2616 mm (103.0 in)
Overall Width (min./max.) 914 mm (36.0 in)
Inside Width (min./max.) 534 mm (21.0 in)
Height From Ground with Standard 8.00-16 R1 Rear Tires and 5.00-12 R1 Front Tires
To Top of Hood 1092 mm (43.0 in)
To Top of ROPS 1975 mm (77.8 in)
Ground Clearance, Front Axle 307 mm (12.1 in)
Front Tire Inflation Pressures (Unloaded)
5.00-12 4PR R1 120 kPa (17 psi)
23x8.50-12 4PR R3 150 kPa (22 psi)
23x8.50-12 4PR R4 83 kPa (12 psi)
Front Tire Inflation Pressures (Loaded)
5.00-12 4PR R1 200 kPa (29 psi)
23x8.50-12 4PR R3 160 kPa (23 psi)
23x8.50-12 6PR R4 150 kPa (22 psi)
Rear Tire Inflation Pressures (Unloaded)
9.5-16 4PR R1 140 kPa (20 psi)
315x75D-15 4PR R3 100 kPa (14.5 psi)
12-16.5 6PR R4 83 kPa (12 psi)
8-16 4PR R1 100 kPa (14.5 psi)
Rear Tire Inflation Pressures (Loaded)
9.5-16 4PR R1 140 kPa (20 psi)
315x75D-15 4PR R3 100 kPa (15 psi)
12-16.5 6PR R4 280 kPa (41 psi)
Weight
Model 4100 Gear Including Fluids and Standard R1 Tires 688 kg (1517 lb)
Model 4100 HST Including Fluids and Standard R1 Tires 710 kg (1565 lb)
Model 4100 Narrow Including Fluids, R1 Tires w/ Calcium and one 70 lb Wheel Weight per Tire 866 kg (1907 lb)
Recommended Lubricants
Engine Oil:
Engine Coolant COOL-GARD PRE-DILUTED SUMMER COOLANT
COOL-GARD CONCENTRATED SUMMER COOLANT
Transmission Oil John Deere Low Viscosity HY-GARD® (J20D)
Front Axle Oil John Deere GL-5 Lubricant®-SAE 80W-90
Grease:
John Deere Multi-Purpose SD Polyurea Grease
John Deere Multi-Purpose HD Lithium Complex Grease
(Specifications and design subject to change without notice.)