John Deere

OMTCU13565

Issue L0

Front Mower

1420, 1435, 1445

PIN TC1420G010001, TC1435D010001, TC1445D010001

Introduction

Product Identification

Safety

Operating Machine

Replacement Parts

Service Intervals

Servicing the Machine

After Each Use

Break-In

Every 25 Hours

Every 50 Hours

Every 100 Hours

Every 200 Hours

Every 400 Hours

Every 600 Hours or Seasonal

Service Lubrication

Service Engine

Service Transmission

Service Steering & Brakes

Service Electrical

Service Miscellaneous

Troubleshooting

Storage

Assembly

Specifications

Warranty

John Deere Quality Statement

Service Record

CopyrightŠ Deere & Company

All Manuals Close Window

Service Intervals


Servicing the Machine

Please use the following timetables to perform routine maintenance on your machine.

IMPORTANT: Avoid damage! If operating vehicle in extreme heat, dust, or severe conditions, service machine more often than times shown below.


After Each Use

ˇ Clean debris from operator station and attachment.

ˇ Clean air intake screen and radiator/oil cooler fins.

ˇ Check for loose, missing, or damaged parts.

ˇ Fill fuel tank.

Break-In

After First 10 Hours of Operation

ˇ Check brakes & neutral lock linkages (adjust if needed).

ˇ Change engine oil and filter.

ˇ Check speed control pedals (adjust if needed).

After First 50 Hours of Operation

ˇ Change transaxle oil and filter.

Every 25 Hours

ˇ Check for loose or missing hardware.

ˇ Check tire air pressure (adjust if needed).

ˇ Lubricate rear axle pivot pin (1 place).

ˇ Lubricate engine drive shaft (1 place).

ˇ Lubricate rear axle steering spindles (2WD) (2 places).

ˇ Lubricate PTO shaft (2 places).

Every 50 Hours

ˇ Check battery fluid level.

ˇ Clean battery and posts if needed.

ˇ Check wheel bolt torque and inspect tires.

ˇ Check rear axle oil level. (4WD only).

Every 100 Hours

ˇ Lubricate steering cylinder (2 places).

ˇ Lubricate tie rod ends (2 places).

ˇ Lubricate hydrostatic linkage (1 place).

ˇ Lubricate turn brake pedals (2 places).

ˇ Blow out oil cooler/radiator fins with pressurized air.

ˇ Check speed control, brake, & neutral lock linkages.

Every 200 Hours

ˇ Change engine oil and filter.

ˇ Change fuel filter.

ˇ Clean fuel filter sediment bowl (Diesel Model Only).

ˇ Check air intake and coolant hoses.

ˇ Inspect alternator belt for wear and proper tension.

ˇ Check hose clamps.

Every 400 Hours

ˇ Change transaxle oil and filter.

Every 600 Hours or Seasonal

ˇ Change rear axle oil (4WD Model Only).

ˇ Change engine coolant.

ˇ Check ROPS bolt torque.

ˇ Service the fuel injectors (diesel models), spark plugs (gasoline models), rear axle pivot pin, valve clearance, engine idle speed, cooling system, brakes and neutral lock linkage. (See your John Deere Dealer.)